> ## Documentation Index
> Fetch the complete documentation index at: https://docs.maestrobots.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Token Report Menu

> Paste any contract address to get a Token Report, then multi-buy, multi-sell and set up buy and sell limit orders right from the menu.

To get the Token Report, you simply need to paste the token contract address in your DMs with the bot. The Token Report provides extensive information about the token contract and allows you to multi-buy, multi-sell, and set up buy and sell limit orders for the token.

In the following figure, we display the Token Report of \$CATCHY’s contract address to demonstrate the bot’s capabilities.

<Frame caption="Token Report Buy Menu">
  <img src="https://mintlify.s3.us-west-1.amazonaws.com/maestro-17d89d18/images/sniper/Token%20Report%20Buy%20Menu%20(Updated).png" width="375" />
</Frame>

We will now go through all the relevant buttons:

### 📍 Track

Opens a Trade Monitor for the token without buying it. This allows you to monitor your token's positions in real time for all wallets with a positive token balance. *Track* works even if you don't own the token in any of your connected wallets. The Trade Monitor also allows you to multi-buy, multi-sell and set up buy and sell limit orders for the token. We discuss the Trade Monitor in much more detail on the [Trade Monitor](/sniper/trade-monitor) page.

### 🔄 BSC

If an address has tokens on multiple chains, you can use this button to cycle between the chains.

### Approve

*Exclusive to EVM-compatible chains*

Sends an *Approve* transaction for this token. The *Approve* is sent for the selected wallet if you're buying in Single Wallet Mode, or for the selected wallets if you're buying in Multi mode. If *Auto-Approve* is enabled in your [*Global Approve Settings*](/sniper/global-settings/approve-settings), the bot automatically sends an *Approve* transaction after a successful buy. However, you can approve a token even before you buy it. This is especially useful for pre-launch tokens where one intends to sell quickly after sniping.

### *⇔* Go to Sell

This button switches the menu from buying to selling as displayed in the figure below.

<Frame caption="Token Report Sell Menu">
  <img src="https://mintlify.s3.us-west-1.amazonaws.com/maestro-17d89d18/images/sniper/Token%20Report%20Sell%20Menu%20(Updated).jpg" width="375" />
</Frame>

### Revoke

*Exclusive to EVM-compatible chains*

Sends a *Revoke* transaction for a previously approved token **<u>for all of your connected wallets</u>**.

### **💳 Multi Buy**

This button will only appear when "Multi" is enabled and clicking on it will reveal all of your connected wallets for this chain as shown in the figure below. Through this option, you can send buys simultaneously on multiple wallets. Initially, only the wallets enabled for ["**Manual**"](/sniper/wallet-setup#manual-and-default-wallet) in your *Wallet Settings* are enabled by default, but you can further customize this to select the wallets that you want to participate in any **manual buys initiated by this Token Report**.

<Frame caption="Multi Buy for Token Report Manual Buys">
  <img src="https://mintlify.s3.us-west-1.amazonaws.com/maestro-17d89d18/images/sniper/Multi%20Buy%20(Updated).jpg" width="375" />
</Frame>

### Single Wallet Mode

When "Multi" is disabled, you are essentially choosing to initiate buys using only one of your connected wallets. The name of this wallet is displayed on a button that will only appear when "Multi" is disabled as shown in the image below. Here, for example, buys will be done using only "Wallet2".

<Frame caption="Single Wallet Mode for Token Report Manual Buys">
  <img src="https://mintlify.s3.us-west-1.amazonaws.com/maestro-17d89d18/images/sniper/Single%20Wallet%20Mode.jpg" width="375" />
</Frame>

### **💳 Multi Sell**

Similarly to "**Multi Buy**", the "**Multi Sell**" button is a dropdown and clicking on it will reveal all of your connected wallets **with a positive balance of the token**, as shown in the figure below. Initially, all wallets will be enabled by default in "**Multi Sell**", but you can further customize this to select the wallets that you want to participate in any **manual sells initiated by this Token Report**.

<Frame caption="Multi Sell for Token Report Manual Sells">
  <img src="https://mintlify.s3.us-west-1.amazonaws.com/maestro-17d89d18/images/sniper/Multi%20Sell%20(Updated).jpg" width="375" />
</Frame>

### Buy X BNB, ETH, AVAX, S, TON, TRX or SOL

Buy the amount of tokens equivalent to *X* amount of BNB, ETH, AVAX, S, TON, TRX or SOL using the selected wallets.

### Ape Max

*Available on ETH, BSC, Base, Avalanche and Arbitrum*

Buy max TX of the token using the selected wallets.

### Buy X Tokens

#### *Not available on TON*

Buy *X* amount of tokens using the selected wallets.

### ☢️ Sell All

Sell your **entire holdings of this token across all the wallets** that you've generated or imported for this chain.

### Sell X%

Sell X% of your token balance for the selected wallets.

### Sell X BNB, ETH, AVAX, S, TON, TRX or SOL

Sell the amount of tokens equivalent to *X* amount of BNB, ETH, AVAX, S, TON, TRX or SOL using the selected wallets.

### Sell Max TX

*Available on ETH, BSC, Base, Avalanche and Arbitrum*

Sell max TX of the token using the selected wallets.

### Sell X Tokens

Sell *X* amount of tokens using the selected wallets.

### Slippage

By default, *Slippage* will have the same value of *Slippage* set in your *Global* [*Buy*](/sniper/global-settings/buy-settings) and [*Sell*](/sniper/global-settings/sell-settings) *Settings*, for the *Buy Menu* and the *Sell Menu* respectively. You can set a new slippage value though this menu for your buys and sells separately. This change will only impact **manual** buys and sells **initiated through this panel**. In other terms, setting a slippage value here will not impact the slippage set in your *Global* [*Buy*](/sniper/global-settings/buy-settings) and [*Sell*](/sniper/global-settings/sell-settings) *Settings*, and pasting the same contract again will show the same value of *Slippage* set in your *Global* [*Buy*](/sniper/global-settings/buy-settings) and [*Sell*](/sniper/global-settings/sell-settings) *Settings.*

### Gas Price/Delta

*Not available on Arbitrum, TRX and TON*

By default, *Gas Price/Delta* will have the same values of *Gas Price/Delta* set in your *Global* [*Buy*](/sniper/global-settings/buy-settings) and [*Sell*](/sniper/global-settings/sell-settings) *Settings*, for the *Buy Menu* and the *Sell Menu* respectively. You can set a new gas price/delta value though this menu for your buys and sells separately. This change will only impact **manual** buys and sells **initiated through this panel**. In other terms, setting a gas price/delta value here will not impact the gas price/delta set in your *Global* [*Buy*](/sniper/global-settings/buy-settings) and [*Sell*](/sniper/global-settings/sell-settings) *Settings*, and pasting the same contract again will show the same value of *Gas Price/Delta* set in your *Global* [*Buy*](/sniper/global-settings/buy-settings) and [*Sell*](/sniper/global-settings/sell-settings) *Settings.*

### ⚙️ Snipe

*Exclusive to Ethereum, BSC, Base, Arbitrum and Solana*

Unlocks automated sniping capabilities. This will be discussed in Section [10](/sniper/auto-snipe).

### ⚙️ Buy Limit

Check, edit and add buy limit orders for this token. See the [Buy Limits](/sniper/limit-orders/buy-limits) section for details.

### ⚙️ Sell Limit

Check, edit and add sell limit orders for this token. See the [Sell Limits](/sniper/limit-orders/sell-limits) section for details.

**After you buy through the Token Report (or use the **\_**Track**\_\*\* function), the Trade Monitor will automatically open. This will be explored on the\*\* [**Trade Monitor**](/sniper/trade-monitor) **page.**